MetroPCS LG stylo 2 plus bootloop issues: How to FIX

LG stylo 2 plus MS550 from MetroPCS stuck in the Boot screen? How to fix it?

MetroPCS LG stylo 2 plus boot loop issues: How to FIX?

Having some issues with the LG stylo 2 plus MS550? In fact, A hard reset or master reset can fix almost all software/apps issues on your LG stylo 2 plus.

Learn how to perform a hard reset to restore your phone, please refer to MetroPCS LG stylo 2 plus user manual.

In this tutorial, You will learn how to fix the boot loop issues of LG stylo 2 plus, How to brick/restore your LG stylo 2 plus back to stock with LGUP.

Flashing the stock kdz firmware for MetroPCS LG stylo 2 plus MS550 can fix many issues, such as,

  1. Soft brick
  2. stuck in the Boot screen
  3. Booting loop issues
  4. and more

How to unbrick/restore LG stylo 2 plus back to stock with LGUP

What you need:

1) Install LG USB drivers
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425

2) Install LG UP software
https://mega.nz/#!JtRFkD4Y!u3QgNNaUc-q9w86bBYVoLa9bDBIKA4IZAC57m3rFcsI

3) Install LG UP DLL for MS550: LGUP_MS550.msi
https://mega.nz/#!D5VGHDhY!xemX2oWMCZ1F8uPlFsw3oSOreJcJgKEiiRrPc8BWLIk

4) Download LG stylo 2 plus Stock firmware

Please select the proper firmware for your phone. You can flash any V20 firmware onto a phone with v10 firmware, But you should not try to downgrade the OS of your phone. Please identify the current software version of your phone before trying to flash the stock firmware with LGUP.

LG MS550 stock firmware v10b – Android M
https://mega.nz/#!D4VxiKgD!C03tagBfW46t4rS6LKw6YyR-uR1M3xfrLU2mUgePIro

LG MS550 stock firmware v10r – Android M
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FWBERQ2A725YALEDC7E72YA/MS55010r_00_0318.kdz

LG MS550 Stock firmware V20f – Android N

LG Stylo 2 Plus (MS550) Firmware Update

LG MS550 Stock firmware – other versions.

How to use LG UP to unbrick your LG MS550:

Step 1,

Now connect your Phone to PC Via USB Cable and Run the LG UP Software

Wait until LG UP detect your Phone. If LG UP screen shows up, Go Step 2.

If LG UP can’t find your device, you need to put your phone into download mode manually by

Turn off your phone, press and hold the “Volume Up” button and plug in the USB cable from your computer to the phone.

Now Run the LG UP, waiting for LG UP install necessary USB drivers for your Phone.

When LG UP screen shows up. Go Step 2

Step 2,

From LG UP Screen, click on the Upgrade process option

Click Bin File and Select the v10C firmware that you just downloaded

Now simply click on the Start button to begin the flashing process. Wait for few minutes until the installing process completes.

Welcome back, Now, Your phone is back to Stock.