LG UP DLL for LG G Pad II 10.1 (LG V935)

This is the LG UP DLL for LG G Pad II 10.1 (LG V935).

To unbrick/restore your LG G Pad II 10.1 (LG V935) BACK to stock, You need to install:

1) LG USB drivers
2) LG UP Software
3) LG UP DLL for LG V935

and download the latest firmware for LG G Pad II 10.1 (LG V935): V93510d_00_0220.kdz


**If your LG V935’s current software version is higher than the above firmware, please contact us to download the latest firmware for your device.

Learn how to use LG UP to flash kdz file to unbrick/restore LG V935

Step 1.

Now connect your Phone to PC Via USB Cable and Run the LG UP Software

Wait until LG UP detect your Phone. If LG UP screen shows up, Go Step 2.

If LG UP can’t find your device, you need to put your phone into download mode manually by

Turn off your phone, press and hold “Volume Up” button and plug-in the USB cable from your computer to the phone.

Now Run the LG UP, waiting for LG UP install necessary USB drivers for your Phone.

When LG UP screen shows up. Go Step 6

Step 2, From LG UP Screen, click on the Upgrade option

and then Click Bin File to  Select the LG V935 firmware V93510d_00_0220.kdz

Now simply click on the Start button to begin the flashing process. Wait for few minutes until the installing process completes.