LG Q6 M703 Firmware Update M70320F

LG official is rolling out a new software update for the Canadian LG Q6 M703.

The Update for LG Q6 M703 is software version M70320F, and it includes the February 2019 Android Security Patches.

ModelBuyer SuffixBuyer/CarrierChip TypeProduct TypeLast Update DateChangeLog
LGM703TLSTELUSQCTGSM2019/08/26Security Patches
LGM703RGSROGERSQCTGSM2019/08/26Security Patches
LGM703AVCVIDEOTRONQCTGSM2019/08/26Security Patches
LGM703BLMBELL MOBILITYQCTGSM2019/08/26Security Patches

According to LG official,  The firmware update build M70320C OS is maintenance update based on Android Oreo OMR1. It also includes the July 2019 Android Security Patch

LG Q6 M703 Firmware Update M70320F

Android® Security Patch Level: July 2019

Software Version: M70320F

What is New?

– Security updates from Google have been included in this update.

The Update is now available through FOTA,  You should receive a notification when the update is available for your LG Q6 M703 — or you can check yourself by heading to Settings > About > System updates,> Check for update.  You may also download and install LG Bridge, and then use the LG Bridge to install the latest Security Patch.

If you fail to install the Update through FOTA, You can download and install LG Bridge, and use LG bridge to upgrade your LG Q6 M703!

Use LG Bridge to upgrade, restore, unbrick LG Q6 M703,
LG Bridge – LG Q6 M703


Download LG Q6 M703 Firmware


How to unbrick/restore LG Q6 M703 back to stock;

What you need:

How to use LG UP :

Step 1,

Now connect your Phone to PC Via USB Cable and Run the LG UP Software

Wait until LG UP detect your Phone. If LG UP screen shows up, Go Step 2.

If LG UP can’t find your device, you need to put your phone into download mode manually by

Turn off your phone, press and hold “Volume Up” button and plug in the USB cable from your computer to the phone.>

Now Run the LG UP, waiting for LG UP install necessary USB drivers for your Phone.

When LG UP screen shows up. Go Step 2

Step 2, From LG UP Screen, click on the Upgrade process option

Click Bin File and Select the v10C firmware that you just downloaded

Now simply click on the Start button to begin the flashing process. Wait for few minutes until the installing process completes.

Connect your phone to pc, and put your phone into download mode., run the LG UP software

From LG main screen, Select Upgrade, and then click bin file to select the kdz firmware you just downloaded.

Click start to flash the firmware onto your phone and wait above 3 or 5 min when the process is 100% complete.

Now, Your phone will be rebooted and back to stock.


If you need any further help, please let us know in the comments area below or please contact us by email: [email protected]