G official is rolling out a new software update for the LG G7 ThinQ G710N in South Korea, Now we are able to download the v20f kdz firmware for South Korea Open Unlocked LG G7 ThinQ.
Now, European LG G7 ThinQ owners can upgrade their devices to Android PIE By flashing this Korea Open PIE firmware with LGUP 1.1.5
| Model | Buyer Suffix | Buyer/Carrier | Chip Type | Product Type | Last Update Date |
| LMG710N | 1SK | SK TELECOM_128G | QCT | CDMA | 03-26-2019 |
| LMG710N | SKT | SK TELECOM | QCT | CDMA | 03-26-2019 |
| LMG710N | 1KR | KOREA_OPEN_128G | QCT | CDMA | 03-26-2019 |
| LMG710N | KOR | KOREA | QCT | CDMA | 03-26-2019 |
| LMG710N | KTF | KTF | QCT | CDMA | 03-26-2019 |
| LMG710N | 1KT | KTF_128G | QCT | CDMA | 03-26-2019 |
| LMG710N | 1LG | LG TELECOM_128G | QCT | CDMA | 03-21-2019 |
| LMG710N | LGT | LG U+ | QCT | CDMA | 03-21-2019 |
| LMG710N | LGU | LGT DISTRIBUTION | QCT | CDMA | 01-18-2019 |
Download LG G7 G710N PIE Firmware [OPEN Korea, Unlocked, KDZ]
IMEI:3568670901xxxxx
Model:LMG710N
Suffix:AKOROP
Buyer:KOR
Software Version:G710NO20F_00
OS Version:P
File Name:G710NO20f_00_OPEN_KR_OP_0308.kdz
KDZ File size:3482657415
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW3ELNZ4C24BACUEFD6FG7E/G710NO20f_00_OPEN_KR_OP_0308.kdz
Now You can upgrade the European LG G7 ThinQ to Android PIE with the latest LGUP Dev 1.15.
- Install LG USB Drivers
- Install LGUP For Developer 1.1.5
- Download LGUP DLL for G7 ThinQ
- Download Korea Open Android PIE KDZ firmware
Step 1, Put your phone into download mode.
Turn off your phone, Hold volume up, and Plug your USB Cable to your phone while holding volume up
Step 2, Go the device manager on your PC
Click Ports,
You will see LGE AndroidNet &USB Serial Port (Comx31) – In my case, the port number is COM31
Step 3, Install LGUP DLL
Put the lgup_common.dll downloaded into the C:\Program Files (x86)\LG Electronics\LGUP\model\common
Step 4, open a command prompt
Go C:\Program Files (x86)\LG Electronics\LGUP where you see the LGUP_Cmd.exe
Run below code
I put the G710NO20f_00_OPEN_KR_OP_0308.kdz in the C:\Program Files (x86)\LG Electronics\LGUP\
So I just need to run
lgup_cmd.exe com31 “C:\Program Files (x86)\LG Electronics\LGUP\model\common\LGUP_Common.dll” “G710NO20f_00_OPEN_KR_OP_0308.kdz”
Thanks a lot for LameMonster82’s Guide at XDA forum.