How to unbrick LG LS675 by flashing LS675ZV5 tot firmware with LG UP





in Tips & tricks on - by LGfan

Below you can our guide on How to unbrick LG LS675 by flashing LS675ZV5 tot firmware with LG UP.
You can find the LS675ZV5 tot firmware, LG UP DLL for LS675, LG UP Software and LG USB drivers.

The fimrware below works on LG LS675 with ZV5 or lower software version only. PLEASE DO NOT TRY TO DOWNLOAD THE OS OF YOUR PHONE

Step 1, Download and Install LG USB drivers:
LGMobileDriver_WHQL_Ver_4.0.4.exe

Step 2, Download and Install LG UP DLL for LG LS675
Download: https://mega.nz/#!6sk3zZjZ!w5UUS-97gMvK7ZWdCUi103g6JKhdrDdqpkuslU4Q8Us

Step 3, Download and Install LG UP software:
Download: https://www.mylgphones.com/download-lg-up-software

Step 1, Download LG LS675 firmware: LS675ZV5
Software version: ZV5
Download: https://mega.nz/#!r08FTaoD!1-FqL67XwSYo9TIM4KebaCp1IH7bQNxxWmld4id7HdU


How to unbrick/restore your phone with LG UP:

Put your Phone into download mode

On LG UP Screen, Select refurbish or Upgrade,
Click BIN File type, and select the LS675 TOT firmware you just download. Click start.
Wait until the process shows 100%
You should have your device back to stockin 5or 8 min.


How to get into DOWNLOAD MODE:

1) Turn the device off
2) While holding the VOLUME +(UP) key plug in the device into the pc
3) A screen should pop up and press the VOLUME +(UP) key until you see DOWNLOAD MODE with the progress bar
4) Done

How to get into STOCK RECOVERY:

1) Turn the device off
2) While holding the phone on, press and hold VOLUME -(DOWN) at the same time
3) When you see the LG boot logo hurry up and let go of the VOLUME -(DOWN) and hold it again for a few sec (kinda tricky)
4) Then this will get you into recovery mode


Tagged With: