Device is not in DLOAD mode? – Using BoardDiag to unbrick your LG Phones



in Tips & tricks on - by LGfan

When you want to use BoardDiag to unbrick your LG device, You may experience the “Device is not in DLOAD mode” issue.

“device was not found in dload trying flash programmer” when use boardiag .

This happens when the terminal is not in Qdload mode. -This means  You are not Stuck in “Qualcomm HS-USB QDLoader 9008 mode”

Please Go to the Device Manager and check out the port connection.

** You should not use BoadDiag Tool to unbrick Your Phone if You are not Stuck in “Qualcomm HS-USB QDLoader 9008 mode”

BUT You can force your Phone into Qdload(Qualcomm Download) mode:

Unplug the USB cable and reconnect it following the way to enter the Qdload mode.

-BoardDiag diagnosis SW operates only in Qdload mode. Upon initial USB cable connection, do the following to send it to Qdload mode if no port or USB serial port is held.

Qload mode

Device is not in DLOAD mode

03

how to enter Qdload mode

04

how to enter Qdload mode



 
%d bloggers like this: